Siemens SIMATIC Vision Sensor VS 130-2 Manual page 82

Operator Input
"Start Training" Button
Clicking this button starts the training of the code. After successful training, you
move on to Part 2 of the dialog "Train Code".
The following is displayed in this dialog:
•
The image of the acquired code
•
Below this, the result in the form of a string and
•
The exposure time, brightness and quality of the code (quality grade from A =
best quality to F = worst quality).
To save the code, enter a number between 1 and 14 in "Code number" and click
"Save". Under "Saved codes", you can see which code numbers are already being
used. You can overwrite existing codes by entering the corresponding code
number.
5-38
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01