Siemens SIMATIC Vision Sensor VS 130-2 Manual page 79

Part 1/3: Ports
Here, you either specify or set parameters for the ports. Part 1/3: Ports includes the
following group fields:
•
Ethernet
Here, you set the parameters for the Ethernet port.
•
PROFINET IO
Here, you set the parameters for the PROFINET IO port. These input boxes
are enabled when you select "PROFINET mode" in the "IP Mode" drop-down
list box.
•
DI/DO
Here, you set the switching duration of the digital outputs READ, MATCH,
N_OK.
•
PROFIBUS DP
Here, you set the parameters for the PROFIBUS DP port. These input boxes
are enabled when you select "DHCP" or "Manual" or "DHCP Server" in the "IP
Mode" drop-down list box.
•
TCP/RS-232
Here, you set the parameters for an Ethernet RS-232 converter connected to
the Ethernet port of the processing unit or for the PC/PG on which the TCP
server runs.
•
Archiving/MMI
Here, you specify the address of a server to which you send images and / or
data records for diagnostics and a monitoring time after which connection
establishment is checked again to determine whether the connection exists
between the processing unit and server following a failed connection
establishment.
Note
You will find a detailed description of the parameters the possible values in the
online help that you can call with the "Help" button.
With the "Next" button, you change to the next part of the "Connections" dialog.
The "Apply" button is enabled only when you have changed settings. When you
click on one of these buttons, all the parameters of the current dialog are saved.
The dialog remains open.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Operator Input
5-35