Siemens SIMATIC Vision Sensor VS 130-2 Manual page 91

Information Part 4/5: Analysis
If the processing unit is in STOP mode, in this part of the dialog for the VS 130-2
you can display the last processed image, a persistently stored image or an image
in the diagnostic buffer along with its additional information.
You can also start an evaluation attempt for the displayed image. If processing is
successful, the detected code type and the result string are displayed. With a data
matrix code, you obtain further information on the total number of dots, the correct
and corrected dots and on the surrounding rectangles of objects detected in the
image.
Information Part 5/5: Device Info
This part of the dialog provides you with information on the processing unit, the
firmware, the sensor and the software.
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
Operator Input
5-47