Siemens SIMATIC Vision Sensor VS 130-2 Manual page 3

Preface
Purpose of the Manual
This manual describes the vision sensors SIMATIC VS 130-2 and
VS 130-2vcr. It helps to install, commission and operate the sensors.
The documentation addresses personnel concerned with the engineering,
commissioning and service of automation systems and visualization equipment.
Guide
The manual contains the following guides which provide quick access to the
specific information you need:
•
The manual opens with a complete directory.
•
The manual closes with a detailed index for quick access to the information
you require.
Further information
An installation and wiring manual is included in paper form.
On your CD you will find the "Getting Started" guide for initial commissioning of
your SIMATIC VS 130-2 or VS 130-2vcr vision sensor.
Further support
If you have any questions concerning the use of products which are not answered
in this manual, please contact your local Siemens partner at your Siemens office.
You can find your local partner at:
http://www.siemens.com/automation/partner
You can find a guide to the technical documentation on offer for the individual
SIMATIC products and systems at:
http://www.siemens.de/simatic-tech-doku-portal
You can find the catalog and online ordering systems at:
http://mall.automation.siemens.com/
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
A5E00475759-01
iii