Siemens SIMATIC Vision Sensor VS 130-2 Manual page 64

Operator Input
Parameter
Cycletime Decode
VCompress Decode
(only for
VS 130-2vcr)
Key (only if Decode Decode>
>License >Demo VLicense
=Off)
(only for
VS 130-2vcr)
Check Decode>
(only for VLicense
VS 130-2vcr)
LIGHT
Type LIGHT
Exposure LIGHT
Shutter LIGHT
(only when
Exposure=
Manual)
Brightness LIGHT
(only when
Exposure=
Manual)
MaxShutt. LIGHT
(only when
Exposure=
Auto)
5-20
Path Possible
Values
30 (75 with
high-
resolution
sensor) to
9999 ms
None,
Numeric,
Alphanum
Cannot be
modified
Valid, Invalid
IR
Red
Other
Manual
Auto
Auto V1
1 to 20000 µs 200 µs
10 to 500
5 to 20000
Default setting
2000 ms Here, you enter the upper limit for
the processing time.
None Here, you set the character set that
was used in the Vericode to be read,
to allow data compression if
necessary:
•
None: Maximum character set
Every character requires 8 bits.
•
Alphanum: Only upper case
letters, numbers and a few
special characters are used.
Every character requires 6 bits.
•
Numeric: Only numbers are
used. Every character requires 4
bits.
Device- Displays the license key (8
dependent hexadecimal numbers)
- Displays the status of the license
key.
•
Valid: Valid Vericode license
•
Invalid: Invalid Vericode license
Red Here, you enter the type of
illumination being used.
Auto Here, you set the shutter control:
•
Manual: Manual
•
Auto: Automatic
•
Auto V1: Automatic as in
VS 130-2 V1.x (compatibility
mode)
Enter the shutter speed of the sensor
in µs.
200 Here, you set the brightness.
10 000 Upper limit for the shutter speed of
the sensor in µs
Vision Sensor SIMATIC VS 130-2/VS 130-2vcr
Meaning
A5E00475759-01