Siemens SIMATIC Vision Sensor VS 130-2 Manual page 87

Hide thumbs Also See for SIMATIC Vision Sensor VS 130-2:

Table of Contents

Multicode

The "Multicode" mode allows you to capture and evaluate several images at the

same time with one trigger. To use this function, choose a code set number (1-14)

in the "Code set" drop-down list box and select the codes to be included in the

code set in "Contains codes". Based on the code set, the processing unit obtains

the settings with which the images will be captured at the first trigger and the

trained codes with which they will be compared.

At each further trigger, the processing unit starts at the image of the code that was

last read successfully. If no code can be read, the current decoding order is

maintained.

Note

If a code set contains a code number under which no code was previously trained,

you cannot use this code set for evaluation. With the "Info" job, you can see the

code number under which trained codes are stored in Part 2/4: Code(s).

Vision Sensor SIMATIC VS 130-2/VS 130-2vcr

A5E00475759-01

Operator Input

5-43

Table of Contents

Simatic vision sensor vs 130-2vcr