Platform Components; Platform - Genie GS-2669 DC Service And Repair Manual

Service and Repair Manual

Platform Components

Platform Co mpon ents

2-1 Platform

2-1
Platform
How to Remove the Platform
Bodily injury hazard. This
procedure requires specific repair
skills, lifting equipment and a
suitable workshop. Attempting
this procedure without these skills
and tools could result in death or
serious injury and significant
component damage. Dealer
service is strongly recommended.
Note: This procedure will require an overhead
lifting device capable of supporting 1000 lbs / 454
kg.
1 Remove the cable ties that secures the power
to platform wiring to the bottom of the platform.
Component damage hazard. Be
sure not to cut the power to the
platform wiring.
2 Remove the clamp that secures the platform
controls cable to the platform.
3 Disconnect the platform controls cable from
the connector located under the platform.
4 Remove the platform controls from the
platform.
Component damage hazard.
The platform controls wiring can
be damaged if it is kinked or
pinched.
14 GS-2669 DC • GS-3369 DC • GS-4069 DC
5 Remove the cover from the AC outlet. Tag and
disconnect the wiring from the outlet.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
6 Models with air line to platform option:
Disconnect the air line from the platform. Pull
the air line free of the platform.
7 Attach a sling chain from the overhead lifting
device to the four lifting points on the platform.
8 Remove the two carriage bolts that secure the
platform to the platform pivot at the steer end
of the machine.
November 2016
Part No. 1272220GT