November 2016
Service and Repair Manual
Fault Codes
Genie SmartLink Diagnostic
System
GCON ECM Connector Layout
This machine is equipped with the Genie
SmartLink™ Diagnostic System (GSDS). The
GSDS indicates a machine malfunction has
happened by displaying Operational Indicator
Codes (OIC) and Diagnostic Trouble Codes (DTC).
These codes are displayed at the Platform Controls
and the Ground Controls. The Ground Controls will
display a brief description of the code at the LCD
display as well. Refer to the GCON I/O Maps,
Operational Indicator Codes (OIC) and Diagnostic
Trouble Codes (DTC) in this section, to assist in
troubleshooting faults.
Rear of Ground Controls ECM (models without
outriggers)
Rear of Ground Controls ECM (models with outriggers)
Part No. 1272220GT
GS-2669 DC • GS-3369 DC • GS-4069 DC
95