Genie GS-2669 DC Service And Repair Manual page 93

Service and Repair Manual
Non-steer Axle Components
11 Using a suitable supporting device, secure the
rear axle assembly. Do not apply pressure.
1 axle pivot pin
2 retaining fasteners
3 axle assembly
12 Remove the axle pivot pin retaining fasteners.
13 Using a soft metal drift, remove the axle pivot
pin. Remove the axle assembly from the
machine.
1 axle assembly
2 drive hub
3 retaining fasteners (x4)
4 drive motor
82 GS-2669 DC • GS-3369 DC • GS-4069 DC
14 Remove the retaining fasteners that secure
the drive motor to the drive hub.
15 Support and slide the drive motor shaft out of
the drive hub. Remove the drive motor from
the machine.
November 2016
Part No. 1272220GT