04/SHOCK ABSORBER, SWINGARM
Disassembling the damper
6.12
–
Release the retaining ring and adjusting ring using the special tools.
Hook wrench (T304) (
Hook wrench (T1533) (
–
Turn the retaining and adjusting rings all the way up.
200894-10
–
Remove spring retainer
200895-10
–
Take off the spring with the retaining and adjusting rings.
200896-10
–
Remove the spring. (
–
Clamp the damper into the vise using soft jaws.
–
Note down the current state of the rebound damping.
–
Fully open the rebound damping.
–
Remove screw
The nitrogen pressure dissipates.
Info
The screw of the filling port must be in the highest position.
200897-10
–
Let the oil drain.
–
Remove locking cap
300432-10
p. 152)
p. 151)
.
p. 25)
.
.
26