Removing The Balancer Shaft (125 Duke); Removing The Crankshaft (125 Duke); Preparations (200 Duke); Draining The Engine Oil (200 Duke) - KTM 125 DUKE EU Repair Manual

16 ENGINE

16.3.32 Removing the balancer shaft (125 Duke)

16.3.33 Removing the crankshaft (125 Duke)

16.3.34 Preparations (200 Duke)

16.3.35 Draining the engine oil (200 Duke)

–
Remove screw
–
Take off the lock washer.
–
Remove balancer shaft
304799-10
–
Mount special tool
Protecting sleeve (90129019000) (
–
Position the section of the engine case in a press.
–
Press out the crankshaft.
304800-10
–
Mount special tools
Engine fixing arm (90129002060) (
Engine fixing arm (90129002050) (
Engine assembly stand (61229001000) (
–
Mount the engine on special tool.
Info
Have an assistant help you or use a crane.
305800-10
–
Remove oil drain plug
305801-10
–
Remove oil screen
–
Completely drain the engine oil.
305802-10
.
1
.
2
.
1
p. 257)
and on the engine assembly stand.
1 2
p. 256)
p. 255)
with the O-ring.
1
with the O-ring.
2
p. 254)
104