8.6
Transfer Setup
After starting the configuration tool, set a communication route for the CPU module and personal computer. Open the
"Transfer Setup" window.
[Online] [Transfer Setup]
There are two connection methods:
• Direct connection with a USB or Ethernet cable
• Connection via a network
8.6.1
Connection with a USB or Ethernet cable
The following explains the window operation.
(1) Operating procedure
1.
Click the
2.
Select "USB" or "Ethernet" in the "PLC Direct Connection Setting" window, and click the
button.
3.
Click the
(2) Setting window
(a) "PLC Direct Connection Setting" window
136
button in the "Transfer Setup" window.
button in the "Transfer Setup" window.