8.4.14
Movement
Specify the operation after the status is switched to RUN in the following cases. ( Page 77, Section 7.1)
• Power off on
• Reset RUN
• STOP RUN
(1) Setting window
(2) Setting items
Item
Auto Start
Operation at
transition to RUN
Start by User Operation
Description
Specify the operation at the time of status change, from power on to RUN, from reset
to RUN, or from STOP to RUN, after registration of the data logging setting. Data
logging is automatically started.
Data logging is temporarily stopped. To restart the data logging, the user must
perform a specific operation.
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
8
Setting range
131