Mitsubishi MELSEC Q series User Manual page 113

(3) Displayed items and button
Item
No.
Data Logging Name
Logging Type
Sampling
Trigger
Specification period
Before trigger
Number of
Records
After trigger
Date
CSV Output
Trigger
information
File save
destination
File name
Save
Number of files
to be saved
File switching
timing
File Transfer
Movement
Log Total[MB]
button
● The operations do not depend on the order of the data logging settings.
● By clicking multiple lines while pressing the  or  key, these lines can be deleted or replaced all at once.
Description
The data logging setting No. is displayed.
The data logging name is displayed.
The logging type is displayed.
The target data sampling interval of the data logging is displayed.
The triggering condition is displayed.
The conditions of the data sampling period are displayed.
The number of logging records before trigger is displayed.
The number of logging records after trigger is displayed.
Whether the date and time (time stamp) is output or not is shown.
Whether trigger information exists or not is shown.
The destination to save is displayed.
The saved file name after switching is displayed.
The upper limit in the number of files is displayed.
The data logging file switching timing is displayed.
Whether the data logging file transfer function is enabled or disabled
is displayed.
The data logging setting in the case of transition to RUN is displayed.
The total size of the logging files output for each logging setting is
displayed.
Displays the data logging setting area, allowing editing of the setting for the selected line. When a
blank line is selected, a new data logging setting is added. (If multiple lines are selected, they will be
masked.)
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
Setting
01 to 10
Any name
(32 one-byte or 16 two-byte
characters)
Continuous logging/Trigger
logging/Specification period
logging
Each scanning cycle/Time
specification/
Multiple CPU/Condition
specification
Condition/Trigger instruction
execution/Data logging trigger
operation
Condition specification
0 to 999999
1 to 1000000
To be outputted/Not to be
outputted
To be outputted/Not to be
outputted
Simple setting/Option setting
Folder name, date, and time
1 to 65535
No. of records, file size
condition/Trigger logging
Transfer/Not transfer
Auto Start/
Start by User Operation

Reference


Page 114,
Section 8.4.3
Page 115,
Section 8.4.4
Page 121,
Section 8.4.8
Page 123,
Section 8.4.9
Page 124,
Section 8.4.10
Page 125,
Section 8.4.11
8
Page 127,
Section 8.4.12
Page 129,
Section 8.4.13
Page 131,
Section 8.4.14
Page 132,
Section 8.4.15
Page 110,
Section 8.4.1
111