File Access - Mitsubishi MELSEC Q series User Manual

7.3

File Access

The FTP server function allows saving and deletion of data logging files from the SD memory card installed in the CPU
module to the personal computer. The following commands can be used for access. When a file is to be specified, use
a command for which a folder name can be included. Available commands are shown below.
Command
delete Deletes a file.
mdelete Deletes files.
get Reads a file.
mget Reads files.
dir Displays file information.
Remark
For details on command specification, refer to the following.
QnUCPU User's Manual (Communication via Built-in Ethernet Port)
MELSEC-L CPU Module User's Manual (Built-In Ethernet Function)
Function
mdir
ls
mls
rename
quote change
CHAPTER 7 OTHER FUNCTIONS
Command
Stores file information in a file.
Displays a file name.
Stores a file name in a file.
Changes a file name.
Displays or changes a file attribute.
Function
81
7