File Transfer - Mitsubishi MELSEC Q series User Manual

8.4.13

File transfer

Configure settings that are required for performing the data logging file transfer function. ( Page 82, Section 7.4)
(1) Setting window
(2) Setting items
Item
Transferring files to the FTP server
button
Transfer Destination Server Setting List
FTP server connection request timeout time
Resending files during the File transfer
file transfer retry time retry time
*1
Resending files failed in transfer
Adding 'C_' at the beginning of the file name
*1 Before using this setting, check the versions of the CPU module and configuration tool used. ( Page 190, Appendix
2)
Set whether to enable or disable the data logging file transfer function.
The "FTP Setting" window is displayed.
( Page 130, Section 8.4.13 (3))
Settings for the set transfer destination server are listed.
Set waiting time for the FTP server to respond to a connection request.
If specified, the latest file is transferred repeatedly until the file transfer retry time
is reached.
Specify when stack logging file transfer is executed.
( Page 92, Section 7.4.7)
Specify when transfer completion/non-completion file distinction indication is
*1
executed.
( Page 94, Section 7.4.8)
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
Description
8
Setting range



1 to 30 seconds
1 to 1440 minutes


129