Buffer Capacity Setting - Mitsubishi MELSEC Q series User Manual

8.5.2

Buffer capacity setting

Set buffer capacity that can be used for each setting number. ( Page 68, Section 6.6)
(1) Operating procedure
Perform the following.
[Common Setting] on the edit item tree  [Buffer Capacity Setting]
(2) Setting window
(3) Setting items
Item
Setting No.
Buffer Capacity
Total
● Write the buffer capacity setting to the CPU module with all data loggings stopped. The data logging status can be
confirmed in the "Logging Status and Operation" window. ( Page 149, Section 8.10)
● When executing the data logging function and the real-time monitor function concurrently, adjust the sum of the buffer
capacity used in each function to not more than 5120K bytes. For how to set the buffer capacity of the real-time monitor
function, refer to the following:
GX LogViewer Version 1 Operating Manual
Description
Data logging setting numbers are displayed.
Set the capacity of the buffer used.
The total of the configured buffer capacities is displayed.
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
32 to 4832K bytes
8
Setting range


135