8.5.1
Auto logging setting
Configure the settings to perform the auto logging ( Page 78, Section 7.2) by inserting an SD memory card.
(1) Operating procedure
Perform the following.
[Common Setting] on the edit item tree [Auto Logging Setting]
(2) Setting window
(3) Setting items
Item
Enable the auto logging function
Data logging stop
Auto logging
terminate
condition
Elapsed
Timer
time
134
Description
For auto logging using an SD memory card, select this.
Set a condition to terminate auto logging.
Set whether or not to terminate the auto logging after the specified period of
time has elapsed after start of data logging. Set a time value for auto logging
termination when "Complete with timer" is selected.
Setting range
• When all data loggings stop
• When any of the data
loggings stops
1 to 86400 seconds