Mitsubishi MELSEC Q series User Manual page 184

No.
While the saved file number has reached the maximum of FFFFFFFF
33
registration of a data logging was attempted. Or, the number reached the
34
maximum of FFFFFFFF
H
While the data logging function is in operation with a step number specified in
35 "Sampling" or "Trigger" (the logging status is "Executing", "Saving the logging
data", "Completed", "Pausing", or "Error"), online change was attempted.
Registration of a data logging was attempted in the state where a sub-folder
for storing a data logging file (or folder) cannot be created, or in the
36
inaccessible state. Or, the file was not created or accessed in the status of
"Executing" or "Saving the logging data".
Registration of a data logging was attempted even though file (folder) creation
or access is disabled because the same file (folder) name already exists is
37
used for the data logging. Or, the file was not created or accessed in the
status of "Executing" or "Saving the logging data".
The number of files in the root folder and sub-folders of the target memory,
38 which were created from the configuration tool on a different connected
device from the one at the time of registration, has exceeded the maximum.
One of the following was performed while the data logging function is in
operation (the logging status is "Executing", "Saving the logging data",
"Completed", "Pausing", or "Error").
• The SD memory card was removed.
• High-speed Universal model QCPU and Universal model Process CPU:
39
The SD memory card access control switch was pressed for one second or
longer.
• LCPU: The SD memory card access control switch was slid up.
• The SD memory card was disabled by SM606 (SD memory card forced
disable instruction).
40 System error
41 Request or setting data error
42 Connection of the control port to the FTP server failed.
43 Disconnection of the control port with the FTP server failed.
44 Login to the FTP server failed.
45 Execution of the FTP command to the FTP server failed.
46 Connection of the data transfer port to the FTP server failed.
47 Disconnection of the data transfer port with the FTP server failed.
48 An error occurred during file transfer to the FTP server.
• Data logging file transfer function settings are mistaken.
49
• A data logging setting file is corrupt.
• A data logging file to be transferred was deleted during transfer by file
50 switching.
• Reading of a data logging file failed.
• A new data logging file is saved by file switching before a data logging file is
51 transferred.
• A new data logging file is saved during retry by file switching.
52 File transfer failed due to the stop operation of file transfer.
A file transfer test was executed from another configuration tool during
53
execution of a file transfer test.
Data logging settings of a different programmable control series was
54 registered (for the High-speed Universal model QCPU and Universal model
Process CPU).
The total sum of the buffer capacity of real-time monitor and the buffer
55
capacity of data logging is exceeding the maximum capacity (for the LCPU).
182
Error cause
during execution.
Value in special register
Timing of
(Data logging error cause
occurrence
,
Registration
H
During execution
Registration
During execution
Registration
During execution
Any time
During execution
Registration
Error response
No.
information)
213 4278
H
503
H

504
H
214 41CC
H
505

H
218 41CD
H
507
H
508
H

506
H
F00
H
F01 4080
H
41AE
41AF
41B0
41B1
41B2
41B3
41BA
427C

427D
427E
427F
4280
219 4281
H
21A 4290
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H
H