Paste/Insert Device Copied In Other Application Software - Mitsubishi MELSEC Q series User Manual

8.4.6

Paste/Insert device copied in other application software

A device which is copied in other application (such as Watch window of GX Works3 or GX Works2, a spreadsheet, or
a text editor) can be paste to any line in the setting window of "Data".
Remark
Before using these functions, check the version of the configuration tool used. ( Page 190, Appendix 2)
(1) Operating procedure
On the setting window of "Data", select a line where copied data is to be pasted and select the item in the right-
click menu.
The keyboard shortcut for "Paste device copied in other application software" is  +  + . Note that this keyboard
shortcut is valid only when the head device column is selected.
(2) Operation details
The following table summarizes the operation details of the functions.
Item
Paste device copied in other application software
Insert device copied in other application software
*1 From the start to the newline or the first tab of strings in each line on the clipboard are pasted or inserted.
*2 If a copied string is invalid as a device, it cannot be pasted or inserted.
Pastes a device which is copied in other application into a line selected. (Existing data in the line are
*1*2
overwritten and erased.)
Settings other than head devices are entered as default settings correspond to each device.
Pastes a device which is copied in other application into a line selected and shifts down existing data in
*1*2
the selected line and below.
Settings other than head devices are entered as default settings correspond to each device.
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
Operation
8
119