Chapter 5 Start-Up Of The Configuration Tool; Getting The Configuration Tool - Mitsubishi MELSEC Q series User Manual

CHAPTER 5
This chapter describes the procedure for starting the configuration tool.
5.1

Getting the Configuration Tool

The configuration tool is included in the programming tool.
(1) Programming tools that include the configuration tool
The configuration tool is included in the CD-ROM of the following programming tools. Applicable versions are as
follows:
Relevant CPU module
High-speed Universal model QCPU
Universal model Process CPU
LCPU
*1 For the configuration tool version, which is compatible with the High-speed Universal model QCPU and Universal model
Process CPU, refer to Page 190, Appendix 2.
46
START-UP OF THE CONFIGURATION
TOOL
GX Works2
*1
1.98C or later
*1
1.492N or later
1.20W or later
configuration tool
GX Developer
Not supported
Not supported
8.89T or later