Connection From An Interface Board - Mitsubishi MELSEC Q series User Manual

2.1.3

Connection from an interface board

The following figure shows configurations of the systems, in each of which the personal computer is connected to a
CPU module using an interface board installed in the personal computer. For the applicable interface boards and
details of a USB driver, refer to the manual for the interface board used.
Personal computer
MELSEC interface board
Standard interface board
For the connectable CPU modules, refer to the manual for the interface board used.
TCP connection is recommended when devices are connected on Ethernet. For Ethernet direct connection or UDP
connection, it takes time to process the following:
• Opening the window of the configuration tool
• Logging file operation ( Page 152, Section 8.11)
For specifications of Ethernet communication, refer to the following.
QnUCPU User's Manual (Communication via Built-in Ethernet Port)
MELSEC-L CPU Module User's Manual (Built-In Ethernet Function)
MELSEC interface board
+ Driver
Standard interface board
+ Driver
Interface board name
MELSECNET/H interface board
CC-Link IE Controller Network interface board
CC-Link IE Field Network interface board
CC-Link Ver.1 interface board
CC-Link Ver.2 interface board
Ethernet interface board
CHAPTER 2 SYSTEM CONFIGURATION
(Another station) (Another station)
or
QnUDVCPU LCPU
(Own station or (Own station or
another station) another station)
or
QnUDVCPU LCPU
2
31