8.6.5
Searching CPU modules on the network
CPU modules on the Ethernet network can be searched and the search results are displayed as a list if they are
connected to the hub to which the configuration tool is also connected.
(1) Operating procedure
1.
In the "Transfer Setup" window, select "Ethernet Board" for "PC side I/F", and double-click "PLC
Module" of "PLC side I/F".
2.
Select a CPU mode for "PLC Mode".
3.
Select "Connection via HUB", and click the
4.
Select a target CPU module from the CPU information list, and click the
(2) Setting window
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
button.
button.
8
141