Mitsubishi MELSEC Q series User Manual page 25

(5) Configuration for logging is simple.
Logging settings can be configured easily by following the wizard.
(6) A large volume of logging files can be stored.
Use of an SD memory card of up to 16GB enables a long-term logging.
(7) Data sampling for troubleshooting can be instructed easily.
Data required for troubleshooting can be collected by simply sending an SD memory card (where auto logging
setting data are stored) to the factory floor and inserting it into the slot of the CPU module. (Auto logging function)
Furthermore, the logged data can be analyzed if the SD memory card is returned to the office after termination of
the logging.
4) Analyzing
data
Office
Logging starts automatically by
inserting the SD memory card into
the slot of the CPU module.
1) Sending a card
SD memory
card
3) Returning the card
CHAPTER 1 DATA LOGGING
Settings configured.
QnUDVCPU
or
LCPU
2) Sampling
data
Factory floor
1
23