Chapter 2 System Configuration; Overall System Configuration - Mitsubishi MELSEC Q series User Manual

CHAPTER 2
This chapter describes a system configuration for executing the data logging function.
2.1

Overall System Configuration

An overall system configuration for executing the data logging function is shown below.
FTP server
QnUDVCPU
SD memory card
(sold separately,
required)
QnUDVCPU
SD memory card SD memory card
(sold separately, (sold separately,
required)
*1 The data logging file transfer function requires an FTP server. For details on the server, refer to the manual for the server
used.
For connection, refer to  Page 28, Section 2.1.2 and  Page 31, Section 2.1.3.
*2
For connection to the CPU module, refer to  Page 32, Section 2.2.
26
SYSTEM CONFIGURATION
*1
Ethernet, CC-Link, or C24
LCPU LCPU
SD memory card
(sold separately,
required) required)
Connection from a USB or serial
*2
port
Connection from an interface board
Settings configured.
Configuration tool
Settings displayed.
Connection via network modules
*2
GX LogViewer
Personal
computer
*2