Reading The Data Logging Setting From The Sd Memory Card - Mitsubishi MELSEC Q series User Manual

8.3.5

Reading the data logging setting from the SD memory card

Read the data logging setting written on the SD memory card in the personal computer.
(1) Operating procedure
1.
Install the SD memory card in the personal computer.
2.
Open the "Read Logging Setting from Memory Card(SD)" window.
[Project]  [Read Logging Setting from Memory Card(SD)]
3.
Select a drive to read from.
4.
Select a setting item to read.
5.
Click the
● If some data currently exist in the configuration tool before reading, the common settings and the setting data with the
same setting No. will be overwritten. Data other than the above will be held in the configuration tool. Because of this, the
data to be read out may not match the data read out.
● If the programmable controller series of the setting data differs between in the SD memory card and in the configuration
tool, the one in the SD memory card is replaced with that in the configuration tool when the setting data is read. Note that
the setting data cannot be read if its programmable controller series in the SD memory card is "RCPU" or "FX5CPU".
106
button.