Transfer Completing/Non-Completing File Distinction Indication - Mitsubishi MELSEC Q series User Manual

7.4.8
Transfer completing/Non-completing file distinction
indication
Remark
Check the versions of the CPU module and configuration tool used when using this function with the LCPU. ( Page 190,
Appendix 2)
This function cannot be used with the High-speed Universal model QCPU and Universal model Process CPU.
For the data logging file in the SD memory card, character string "C_" (abbreviated designation of "Complete_") is
added to a file name after file transfer completion to the FTP server. Only checking the file name of the data logging file
in the SD memory card can distinguish at first sight whether the file has been transferred to the FTP server.
Ex. File name before the transfer: LOG01_00000001.CSV
File name after the transfer: C_LOG01_00000001.CSV
Only a saved file of the data logging function is a target of the character string "C_" addition.
(1) Setting methods
Settings for the stack logging file transfer is set by "File transfer" in data logging settings.
( Page 129, Section 8.4.13)
(2) Cautions
• The saved file name can be set up to 46 characters (including the extension and period) to add the character
string for two characters to the file name by the transfer completion/non-completion file distinction indication.
• When an abnormal completion is encountered as a result of an error during file transfer, character string
"C_" is not added to it.
94