Specification Period - Mitsubishi MELSEC Q series User Manual

8.4.9

Specification period

When "Specification period logging" is selected for Logging type, specify the conditions of the data sampling period.
( Page 61, Section 6.3.3)
(1) Setting window
(2) Setting items
Item
Device
Conditional
formula
Condition
specification
Radix
Value
Description
Any of the devices listed in Page 62, Section 6.3.3 (1) (b) can be set.
• For bit device
"ON": When the status of the specified device is on
Data are sampled while the specified device is on.
"OFF": When the status of the specified device is off
Data are sampled while the specified device is off.
• For word device
"=": When the current value of the specified device meets the condition value
Data are sampled while the current value of the specified device is equal to the
condition value.
Set a radix of the condition value for the word device.
Set a condition value.
CHAPTER 8 HOW TO USE THE CONFIGURATION TOOL
• For bit device:
"ON", "OFF"
• For word device:
"="
DEC or HEX
• Decimal: -32768 to 32767
• Hexadecimal: 0
8
Setting range

to FFFF
H H
123