General Protective Notes And Protective Measures - Mitsubishi MELSEC-WS0-CPU0 User Manual

Chapter 2
ATTENTION
Note
21
On safety
2.4 General protective notes and protective
measures
Observe the protective notes and measures!
Please observe the following items in order to ensure proper use of the MELSEC-
WS safety controller.
 When mounting, installing and using the MELSEC-WS safety controller, observe
the standards and directives applicable in your country.
 The national/international rules and regulations apply to the installation, use and
periodic technical inspection of the MELSEC-WS safety controller, in particular:
– Machinery Directive 2006/42/EC
– EMC Directive 2004/108/EC
– Provision and Use of Work Equipment Directive 2009/104/EC
– Low-Voltage Directive 2006/95/EC
– the work safety regulations/safety rules
 Manufacturers and owners of the machine on which a MELSEC-WS safety
controller is used are responsible for obtaining and observing all applicable safety
regulations and rules.
 The notices, in particular the test notices (see Chapter 9) of this manual (e.g. on
use, mounting, installation or integration into the existing machine controller) must
be observed.
 The tests must be carried out by specialized personnel or specially qualified and
authorized personnel and must be recorded and documented to ensure that the
tests can be reconstructed and retraced at any time by third parties.
 This manual must be made available to the user of the machine where the
MELSEC-WS safety controller is used. The machine operator is to be instructed
in the use of the device by qualified personnel and must be instructed to read the
manual.
*1 WS0-4RO only.
*1