Figure 24:
Removing the plug-in
terminals
Figure 25:
Disconnecting the plug
connections
Figure 26:
Removing modules from
the DIN mounting rail
Mounting/Dismantling
6.2
Steps for dismantling the modules
Remove plug-in terminals with the wiring and the end clips.
If there are several modules, slide the modules away from each other individually
in the direction of the arrow until the side plug connection is separated.
Press the module downwards at the rear (1)) and remove it from the DIN
mounting rail in the direction of the arrow while keeping it pressed down (2)).
Chapter 6
72