Table 5-23 Two-Loop Functionality And Restrictions (Model Dc330E-Ke-2Xx Or Model Dc330E-Ke-5Xx) - Honeywell UDC 3300 Product Manual

Two-loop restrictions
Table 5-23
Controller with Two Current Outputs (including Auxiliary Output) and Three Relay Outputs
Output Type
Loop 1 is TIME SIMPLEX,
Loop 2 is:
Time Simplex
Current or Current Duplex (100 %)
Current/Time or Time/Current
Loop 1 is TIME DUPLEX/TPSC,
Loop 2 is:
Time Simplex (N/A)
Current or Current Duplex (100 %)
Current/Time or Time/Current (N/A)
Loop 1 is CURRENT OUTPUT or
CURRENT DUPLEX – 100 %,
Loop 2 is:
Time Simplex
Current or Current Duplex (100 %)
Current/Time or Time/Current (N/A)
Loop 1 is CURRENT DUPLEX – 50 %,
Loop 2 is:
Time Simplex
Current (N/A)
Current/Time or Time/Current (N/A)
Loop 1 is TIME/CURRENT or
CURRENT/TIME,
Loop 2 is:
Time Simplex
Current or Current Duplex (100 %)
Current/Time or Time/Current
TWO-LOOP RESTRICTIONS:
1. Time Duplex and Three Position Step Control are not available on Control Loop 2.
2. Position Proportional Control is not available on Two-Loop or Cascade Controllers.
3. If either Time Duplex or Three Position Step Control is selected as Control Loop 1 Output, then Time Simplex,
Current/Time Duplex and Time/Current Duplex are not available for Control Loop 2 Output.
4. Current Duplex 50 % is not available on Model No. DC330E-EE-2XX.
176
Table 5-23 gives two-loop functionality and restrictions for controllers
with two current outputs (including Auxiliary output) and two relay
outputs.
Two-loop Functionality and Restrictions (Model DC330E-KE-2XX or
Model DC330E-KE-5XX)
Current
Not used
Not used
Not used
—
Not used
—
Loop 1 Output
Loop 1 Output
Loop 1 Output
Loop 1,Output 1
—
—
Loop 1:
Output 1 or 2
Loop 1:
Output 1 or 2
Loop 1:
Output 1 or 2
UDC 3300 Controller Product Manual
Auxiliary Relay #1
Not used N/A
Loop 2 Output N/A
Loop 2: N/A
Output 1 or 2
— —
Loop 2 Output N/A
— —
Not used N/A
Loop 2 Ouptut N/A
Loop 2: N/A
Output 1 or 2
Loop 1,Output 2 N/A
— —
— —
Not used N/A
Loop 2 Output N/A
Loop 2: N/A
Output 1 or 2
Relay #2 Relay #3
Loop 1 Output Loop 2 Output
Loop 1 Output Alarm 1
Loop 1 Output Loop 2:
Output 1 or 2
— —
Loop 1,Output 1 Loop 1,Output 2
— —
Loop 2 Output Alarm 1
Alarm 2 Alarm 1
Loop 2: Alarm 1
Output 1 or 2
Loop 2 Output Alarm 1
— —
— —
Loop 1: Loop 2 Output
Ouptut 1 or 2
Loop 1: Alarm 1
Output 1 or 2
Loop 1: Loop 2:
Output 1 or 2 Output 1 or 2
4/00