Honeywell UDC 3300 Product Manual page 17

4/00
Key
LOWER 1PV
DISPLAY 2PV
AUX
OC1
OC2
SPn
• (Sigma)
BIA
TUNE OFF
TUNE RUN
ToBEGIN
OTI
Note 1: Value can be changed if in manual mode
Note 2: Value can be changed via increment/decrement keys.
Note 3: The selected set can be changed via increment/decrement
keys.
MANUAL • Alternately selects:
AUTO AUTO
MAN
SETPOINT • Hold key down to cycle through configured setpoints.
SELECT
RUN • Alternate action switch initiates or holds the Setpoint Ramp
HOLD or Setpoint Program.
• Acknowledges a latched alarm 1.
• Increases the selected parameter value.
• Decreases the selected parameter value.
UDC 3300 Controller Product Manual
Function
=
For Cascade or 2 Loops
=
For Cascade or 2 Loops
=
Auxiliary Output
=
Characterized Output 1
=
Characterized Output 2
= Setpoint Now
(for setpoint rate)
=
Current Totalizer Value
= Output Bias/Manual Reset Value
=
Appears when Limit Cycle tuning is disabled
=
Press and LOWER DISPLAY to initiate
Limit Cycle tuning.
Display will read TUNE RUN.
=
Reset SP Program to start of first segment
= Internal Loop 1 Output Value is being
displayed (Override has been selected and
Loop 1 is in Automatic mode.)
Lower display automatically displays setpoint
value in engineering units.
Lower display automatically indicates output in %.
5