Honeywell UDC 3300 Product Manual page 197

Alarm on totalizer
value
Totalizer reset via
digital input
4/00
The alarm type configuration includes an Alarm on Totalizer value. This
allows an alarm setpoint value to be used to cause an alarm when
exceeded. The alarm setpoint represents the lowest four digits of the
selected Totalizer Scale Factor and has a range from 0 to 9999 x Totalizer
Scale Factor.
The digital input type configuration includes a Reset Totalizer that resets
the accumulated totalizer value when the DI is closed.
UDC 3300 Controller Product Manual 185