Table 3-6 Accutune Group Function Prompts - Honeywell UDC 3300 Product Manual

Function prompts
Function Prompt
Lower Display
FUZZY Fuzzy Overshoot
Suppression
ACCUTUNE Accutune—Loop 1
ACCUTUN2 Accutune—Loop 2
SP CHANG*
Setpoint Change Value—
Loop 1
KPG* Process Gain—Loop 1
SP CHAN2* Setpoint Change Value –
Loop 2
KPG 2* Process Gain – Loop 2
CRITERIA* Tuning Criteria—Loop 1
CRITERA2* Tuning Criteria – Loop 2
AT ERROR Accutune Error Codes
or
AT ERR 2
(depending on
Loop)
*Applies to SP and SP+PV only.
48
Table 3-6 lists the function prompts in the Accutune Set Up group.
Table 3-6 Accutune Group Function Prompts
Function
Name
DISABL
ENABLE
ENABL2
ENAB12
DISABL
TUNE (Demand Tuning)
SP (SP Tuning)
TUN+PV
SP+PV
DISABL
TUNE (Demand Tuning)
SP (SP Tuning)
TUN+PV
SP+PV
5 to 15 % Input Span
0.10 to 10.00
5 to 15 % Input Span
0.10 to 10.00
NORMAL
FAST
NORMAL
FAST
Read Only
UDC 3300 Process Controller Product Manual
Selections or
Range of Setting
Upper Display
RUNING (Accutune process in
operation)
NONE
OUTLIM
IDFAIL
ABORT
LOW PV
Factory Refer
Setting to
DISABL Section
4.5
DISABL
DISABL
10
1.00
10
1.00
FAST
FAST
- -
4/00