Figure 9-3 Removing The Printed Wiring Boards; Table 9-18 Printed Wiring Board Removal From Chassis - Honeywell UDC 3300 Product Manual

How to remove the
printed wiring boards
from the chassis
264
To remove the printed wiring boards from the chassis, refer to Figure 9-3
and follow the procedure in Table 9-18.
Table 9-18 Printed Wiring Board Removal from Chassis
Step
1 Remove the chassis from the case as shown in Figure 9-1.
2
Separate the chassis frame at the release points shown in Figure 9-3 and
wiggle each printed wiring board out of its socket on the display/keyboard
assembly. Pull both boards out of the chassis assembly.
Figure 9-3
UDC 3300 Controller Product Manual
Action
Removing the Printed Wiring Boards
Pull printed
wiring boards out
of chassis
Chassis assembly
Rubber bezel
and window
Printed wiring
boards
release points
22639
4/00