Error And Status Indicate On The Control Panel; Messages On The Screen - Ricoh SP 203SF Manual

10. Troubleshooting
Error and Status Indicate on the Control
MF
Panel

Messages on the Screen

FiO
• If the "Service Call: SCXXX" appears, contact your sales or service representative.
• Depending on the model you are using, some error messages may not appear.
Message
Tray 1
Out of Paper
Bypass Tray
Out of Paper
Misfeed: Inner/
Outer
Misfeed: ADF
Open Cov. Rmv.
Paper
Set Correct Size Ppr
Press Start to Print
Cover Open
Memory Overflow
Press Start or Stop
220
Causes
Tray 1 has run out of paper.
The bypass tray has run out of
paper.
A paper jam has occurred in the
machine.
An original has been jammed
inside the ADF.
The paper for printing fax is not
loaded.
The front cover or fusing cover is
open.
Memory has reached capacity
during sort copy and duplex.
Solutions
Load paper into Tray 1. See page 51
"Loading Paper".
Load paper into the bypass tray. See
page 51 "Loading Paper".
Remove the jammed paper. See page 204
"Paper Feed Problems".
• Remove jammed originals, and then
place them again. See page 204
"Paper Feed Problems".
• Check the originals are suitable for
scanning. See page 60 "Placing
Originals".
Load the appropriate size paper.
Close the front cover or fusing cover
completely.
If several originals are still to be scanned,
it is recommended to start printing now,
and copy the remaining originals
separately. If originals are being scanned
from the ADF, remove any remaining
pages from the ADF.
opal-p1_mf1_wi-fi_user_guide_gb_00104878_eng.xml
Draft 2013/03/07