Codes On The Screen - Ricoh SP 203SF Manual

10. Troubleshooting
Message
Numbers Do not
Match
Cannot Copy
Change Paper Size
Cannot Scan
Remove Paper In
ADF
Cannot Scan
Insert Paper to ADF
Please Remove
Unsupported Device
Please Remove
Unsupported USB
Hub

Codes on the Screen

TiO
• If "C", "c", or "r" appears, contact your sales or service representative.
Code
A paper jam has occurred in the
E0
machine.
226
Causes
Scanner
The selected destination is
not registered to a scan
destination list.
"Fax No. Confirmation" is set to
"On", and the numbers entered
for confirmation does not match
the initially-entered numbers.
The paper for combine copy,
duplex copy or ID Card copy is
not loaded.
A6 and custom size paper are
not supported.
Legal paper is not supported.
An unsupported USB device is
connected.
USB hubs are not supported.
Causes
Solutions
Make sure the numbers match.
Load the appropriate size paper.
• Load the ADF with paper other than
A6 or custom size paper.
• Scan the originals using the exposure
glass.
• Load the exposure glass with paper
other than legal paper.
• Scan the originals using the ADF
Disconnect the USB device.
USB Flash drives is supported.
Disconnect the hub.
Solutions
Remove the jammed paper. See page 204
"Paper Feed Problems".
opal-p1_mf1_wi-fi_user_guide_gb_00104878_eng.xml
Draft 2013/03/07