Ricoh SP 203SF Manual page 103

2. Using the number keys, enter the number of a registered scan destination.
For details, see page 96 "Registering the Scan Destination".
If you are using Scan to USB, proceed to Step 4.
3. Press the [OK] key.
4. Press the [
select [Resolution], and then press the [OK] key.
5. Press the [
select [150 × 150dpi], [300 × 300dpi] or [600 × 600dpi], and then press the [OK] key.
You can select [600 × 600dpi] only if the original type is set to B&W.
6. Press the [
opal-p1_mf1_wi-fi_user_guide_gb_00104839_eng.xml
(alt="Down arrow key"
(alt="Down arrow key"
(alt="Left arrow key" title="")] key to return to the initial screen.
title="")] or [ (alt="Up arrow
title="")] or [ (alt="Up arrow
Specifying the Scan Settings
key" title="")] key to
key" title="")] key to
Draft 2013/03/07
103