Basic Operation; Scan To E-Mail/Ftp/Folder - Ricoh SP 203SF Manual

Basic Operation

FiO
Scanning using the control panel allows you to send scanned files via e-mail (Scan to E-mail), to an FTP
server (Scan to FTP), to the shared folder of a computer on a network (Scan to Folder), or to a USB flash
disk (Scan to USB).
The Scan to E-mail, Scan to FTP, and Scan to Folder functions are available only through a network
connection. No network connection is required for the Scan to USB function; you can send scanned files
directly to a USB flash disk inserted into the front of the machine.

Scan to E-mail/FTP/Folder

• When using the Scan to E-mail, Scan to FTP or Scan to Folder function, you must first register the
destination.
• To use the Scan to E-mail function, it is necessary to specify [Server Properties...] in Smart
Organizing Monitor. For details, see the Smart Organizing Monitor Help.
• Mac OS X 10.7 does not support the Scan to Folder function. Also, Mac OS X does not support
the function that is used in an IPv6 environment.
1. Press the [Scanner] key.
ctt128.pdf (alt="Scanner key
2. Place the original on the exposure glass or in the ADF.
3. Using the number keys, enter the number of a registered scan destination.
For details, see page 96 "Registering the Scan Destination".
4. Press the [OK] key.
5. Press the [Start] key.
• When using the exposure glass, place the next original on the exposure glass, and then press
the [1] key. Repeat this step until all originals are scanned.
opal-p1_mf1_wi-fi_user_guide_gb_00104838_eng.xml
illustration" title="")
CTT128
Basic Operation
99
Draft 2013/03/07