Ricoh SP 203SF Manual page 37

2. Press the [
to select [Network Settings], and then press the [OK] key.
3. Press the [
to select [Wi-Fi Settings], and then press the [OK] key.
4. Press the [
to select [Channel Number], and then press the [OK] key.
5. Press the [
to select the channel number, and then press the [OK] key.
After a setting has been changed, the machine automatically restarts.
Configuring the Ad-Hoc Mode Using the Smart Organizing Monitor
FiO
1. On the [Start] menu, click [All Programs].
2. Click [Smart Organizing Monitor for SP xxx Series].
3. Click [Smart Organizing Monitor for SP xxx Series Status].
4. If the machine you are using is not selected, click [Select Device...], and then select the
machine's model.
5. Click [OK].
6. On the [User Tool] tab, click [Printer Configuration].
7. On the [Wi-Fi] tab, set [Communication Mode:] to [802.11 Ad-hoc Mode].
8. In [SSID:], enter the SSID.
The characters that can be used are ASCII 0x20-0x7e (32 characters).
9. Select [Security Method:].
10. In the [Channel Number] box, enter the channel number.
11. Specify the appropriate settings in [WEP / WPA / WPA2 Settings].
The maximum number of characters that can be entered in [WEP Key / Passphrase (PSK):]
depends on the [Key Length:], and [Key Format:] settings. Specify settings in accordance with the
following table:
Security Method
Open System - None
Open System - WEP
opal-p1_mf1_wi-fi_user_guide_gb_00104815_eng.xml
(alt="Down arrow key"
(alt="Down arrow key"
(alt="Down arrow key"
(alt="Down arrow key"
Key Length
*1
-
64 bit
title="")] or [ (alt="Up arrow
title="")] or [ (alt="Up arrow
title="")] or [ (alt="Up arrow
title="")] or [ (alt="Up arrow
Key Format
-
ASCII
Hexadecimal
Configuring Network Settings
key" title="")] key
key" title="")] key
key" title="")] key
key" title="")] key
WEP Key/Passphrase
(Maximum character)
-
5 characters
10 characters
Draft 2013/03/07
37