Ricoh SP 203SF Manual page 158

7. Configuring the Machine Using the Control Panel
• Subnet Mask
Specifies the machine's subnet mask when DHCP is not used.
Use this menu to check the current subnet mask when DHCP is used.
Default: 255.255.255.0
• Gateway Address
Specifies the machine's default gateway address when DHCP is not used.
Use this menu to check the current default gateway address when DHCP is used.
Default: 192.0.0.192
Machine IPv6 Address
• Use IPv6
Select whether to enable or disable IPv6.
Default: [On]
• On
• Off
• Link-local Address
Displays the IPv6 link local address.
• Stateless Address 0-4
Displays the IPv6 stateless addresses obtained from a Router Advertisement.
• Stateful Address
Displays the IPv6 stateful address.
• Manual Config. Add.
Specifies the machine's IPv6 address when DHCP is not used.
• IPv6 Gateway Address
Specifies the IPv6 address of the default gateway.
Signal Strength
Displays the signal strength.
•
•
•
•
• Disconnected
Communication Mode
Specify the communication mode of the wireless LAN.
158
(alt="" title="") (alt="" title="")
(alt="" title="") (alt="" title="")
(alt="" title="") (alt="" title="")
(alt="" title="") (alt="" title="")
(alt="" title="") (alt="" title="") (strong)
(alt="" title="") (alt="" title="")
(alt="" title="") (alt="" title="")
(alt="" title="") (alt="" title="") (weak)
opal-p1_mf1_wi-fi_user_guide_gb_00104859_eng.xml
Draft 2013/03/07