Ricoh SP 203SF Manual page 224

10. Troubleshooting
Message
Cannot Obtain IP
#### Server
Communication Error
####
Invalid Password
#### Server
Failed To Connect
####
File Over
224
Causes
The machine cannot obtain an
IP address from the FTP, SMTP,
POP3, or SNTP server.
The connection with the FTP
server, SMTP server, SMB
server, SNTP server, or USB
memory device was lost while
sending or receiving data.
The password entered to access
the FTP, SMTP, POP3, or SMB
server is invalid.
A connection with the FTP
server, SMTP server, POP3
server, SMB server, SNTP
server, or USB memory device
has failed.
The assigned file names range
from SIG000101 to
Solutions
If the problem involves the DNS server,
check its configuration using Web Image
Monitor.
If the problem involves the FTP server,
check the [Edit Network Scan Destination]
setting in Smart Organizing Monitor.
If the problem involves the SMTP/POP3/
SNTP server, check the [Server
Properties...] setting in Smart Organizing
Monitor.
If the problem involves the FTP/SMB
server, check the [Edit Network Scan
Destination] setting in Smart Organizing
Monitor.
If the problem involves the SMTP/SNTP
server, check the [Server Properties...]
setting in Smart Organizing Monitor.
If the problem involves the USB flash drive,
check that it is a supported model, and
then reinsert it.
For future reference, make a note of the
correct password and keep it safe.
If the problem involves the FTP/SMB
server, check the [Edit Network Scan
Destination] setting in Smart Organizing
Monitor.
If the problem involves the SMTP/POP3/
SNTP server, check the [Server
Properties...] setting in Smart Organizing
Monitor.
If the problem involves the USB flash drive,
check that it is a supported model, and
then reinsert it.
Remove or rename the existing file of the
same name.
opal-p1_mf1_wi-fi_user_guide_gb_00104878_eng.xml
Draft 2013/03/07