Ricoh SP 203SF Manual page 157

• Link-local Address
Displays the IPv6 link local address.
• Stateless Address 0-4
Displays the IPv6 stateless addresses obtained from a Router Advertisement.
• Stateful Address
Displays the IPv6 stateful address.
• Manual Config. Add.
Specifies the machine's IPv6 address when DHCP is not used.
• IPv6 Gateway Address
Specifies the IPv6 address of the default gateway.
MAC Address
Displays the MAC address.
Wi-Fi Settings
Wi-Fi Connection
• Search SSID
Select the wireless LAN access point or router identified by the SSID and enter the
password. If the password is correct, a network connection will be established.
• WPS (PBC)
WPS can be performed by push-button configuration (PBC).
• WPS (PIN)
WPS can be performed using the personal identification number (PIN).
Machine IPv4 Address
• DHCP Activated
Sets the machine to receive its IPv4 address, subnet mask, and default gateway address
automatically from a DHCP server.
When DHCP is used, you cannot specify the IPv4 address, subnet mask, or default
gateway address manually.
Default: [On]
• On
• Off
• IP Address
Specifies the machine's IPv4 address when DHCP is not used.
Use this menu to check the current IP address when DHCP is used.
Default: 192.0.0.192
opal-p1_mf1_wi-fi_user_guide_gb_00104859_eng.xml
Network Settings
157
Draft 2013/03/07