Ricoh SP 203SF Manual page 184

8. Configuring the Machine Using Utilities
SNMP
Item
SNMP
SNMPv1,v2 Setting
Item
SNMPv1 Trap
Communication
SNMPv2 Trap
Communication
Community
Item
Community Name
Access Type
[Protocol], [Active/
Inactive]
Manager Address
Configuring the Administrator Password
Click [Administrator Settings] to specify the administrator password.
184
Select whether SNMP is active or inactive for the interface board(s).
Select whether to send SNMPv1 trap.
Select whether to send SNMPv2 trap.
Enter the name of the community to which the network interface board belongs,
using up to 15 characters. If the community name is different from that of the
hosts, requests from the hosts will not be accepted.
In the list, select the access rights to the community.
• Not Accessible
No access permitted.
• read-only
You can read the information, but not edit it.
• read-write
You can read and edit the information.
• trap
Notifies the manager with information about errors. Enter the recipient of
the error notification in the Manager Address box.
Configure settings for each protocol used by the community.
Enter the host computer's address according to the protocol in use.
Description
Description
Description
opal-p1_mf1_wi-fi_user_guide_gb_00104862_eng.xml
Draft 2013/03/07