Ricoh SP 203SF Manual page 41

• SSID
• Password
• Channel Number
Setting the Communication Mode (Using Smart Organizing Monitor)
1. On the [Start] menu, click [All Programs].
2. Click [Smart Organizing Monitor for SP xxx Series].
3. Click [Smart Organizing Monitor for SP xxx Series Status].
4. If the machine you are using is not selected, click [Select Device...], and then select
the machine's model.
5. Click [OK].
6. On the [User Tool] tab, click [Printer Configuration].
7. On the [Wi-Fi] tab, set [Communication Mode:] to [Infrastructure Mode] or [802.11
Ad-hoc Mode].
8. Click [OK].
9. Click [Close].
Configuring the Communication Mode
1. Hold down the [Job Reset] key.
Holding the key down for two seconds or longer makes the power indicator flash.
2. To select Infrastructure mode, press the [Start] key. To select Ad-Hoc mode, press the
[Job Reset] key.
The alert indicator flashes.
• If you connect the machine to a network via USB when [LAN Type] is set to [Wireless LAN],
the communication mode is automatically set to Infrastructure mode.
Ad-hoc mode
• In Ad Hoc network, every device must be manually assigned an IP address for TCP/IP if there is no
DHCP server.
1. Connect the machine and computer with a USB cable.
2. On the [Start] menu, click [All Programs].
3. Click [Smart Organizing Monitor for SP xxx Series].
4. Click [Smart Organizing Monitor for SP xxx Series Status].
opal-p1_mf1_wi-fi_user_guide_gb_00104816_eng.xml
Configuring Network Settings
Draft 2013/03/07
41