HEIDENHAIN iTNC 530 Service Manual page 625

MP Function and input
MP7360 Graphics: 3-D view and plan view
MP7360.0 Background
MP7360.1 Surface
MP7360.2 3-D: Front face
MP7360.3 Text display in the graphics window
MP7360.4 3-D: Lateral face
MP7360.5 Lowest point of blank form
MP7360.6 Highest point of blank form (below surface)
MP7361 Graphics: Projection in three planes
MP7361.0 Background
MP7361.1 Top view
MP7361.2 Front and side view
MP7361.3 Axis cross and text in the graphic display
MP7361.4 Cursor
MP7362 Additional status display in the graphics window
MP7362.0 Background of graphic window
MP7362.1 Background of status display
MP7362.2 Status symbols
MP7362.3 Status values
MP7362.4 Color of the unselected tabs in the graphics window
MP7362.5 AFC tab – Background color
MP7362.6 AFC tab – Color of actual override factor
MP7362.7 AFC tab – Color of actual spindle factor
MP7363 Programming graphics
MP7363.0 Background
MP7363.1 Resolved contour
MP7363.2 Subprograms and frame for zooming
MP7363.3 Alternative solutions
MP7363.4 Unresolved contour
MP7363.5 Rapid traverse movements
MP7364 Color of the help illustrations for cycles
MP7364.0-6 Colors 1 to 7 of the graphic program used
MP7364.7 Line color (color 8 of the graphic program)
MP7364.8 Color for highlighted graphic elements if defined in the help illustration
MP7364.9 Background
MP7365 Oscilloscope
MP7365.0 Background
MP7365.1 Grid
MP7365.2 Cursor and text
MP7365.3 Selected channel
MP7365.4-9 Channel 1 to 6
July 2010
SW version
and
behavior
PLC
RUN
PLC
RUN
PLC
RUN
340 490-04
PLC
RUN
PLC
RUN
PLC
RUN
340 420-02
30 – 625