Execution As Of Nc Software 34049X-02 (Dual-Processor Version) - HEIDENHAIN iTNC 530 Service Manual

15.5 Execution as of NC Software 34049x-02 (Dual-Processor Version)

The provided ZIP file (e.g., 34049204sp6.zip) has still to be unzipped on a data medium
Unzipping the
(PC/laptop/USB stick)!
ZIP File
A folder with the number of the NC software (e.g., 34049204) is created.
This folder contains a subdirectory (e.g., 340492_004_SP6), of the following files:
If the control is connected to the company network and the service pack files were filed on a
Access to the
released folder of the network, you have access to these data. --> If necessary, ask the system
service pack files
administrator.
via the customer
network
You may also use a USB stick as data medium.
Loading the
service pack
15 – 226
setup.exe
setup.ini (optional)
setup.zip
Caution
With the dual-processor version of the iTNC 530 as of NC software 34049x-02, service
packs are installed with Windows.
A corresponding Windows authorization is required.
If necessary, ask the machine manufacturer!
Connect the USB stick to X141 or X142 (USB interfaces of the iTNC 530).
Note
When connecting, USB memory devices that use the file system VFAT or ISO 9660
(not NTFS or similar) are detected automatically.
Press the Windows key to display the taskbar.
With the Windows explorer, e.g., open the folder on the USB stick, that contains the service
pack.
HEIDENHAIN Service Manual iTNC 530