Hardware Identification - HEIDENHAIN iTNC 530 Service Manual

26.2 Hardware Identification

On every HEIDENHAIN product there is an ID label which indicates ...
Thus, each unit is uniquely identified.
ID label
The ID label is attached to the following mandatory and optionals iTNC 530 components:
Main computer
MC main computer
The iTNC 530 comprises 2 components:
MC 42x (B/C) main computer
(MC = Main Computer)
CC 42x(B) controller unit
(CC = Controller Computer)
The MC main computer is available in two versions:
Standard version MC 422 B/C
MC 420 basic version with 5 position encoder
inputs and reduced performance range.
However, these functions can be activated with
two code numbers.
26 – 430
Device designation
ID number
Serial number
Figure: ID label of an MC 422
Note
Whenever possible, the ID label is located well visible on the front of a product. Otherwise,
you may find it on the side or on the rear of the unit.
MC 422 B
HEIDENHAIN Service Manual iTNC 530
MC 420