Corrective Action - HEIDENHAIN iTNC 530 Service Manual

20.2.7 Corrective action

If you have found that the analog interface on the MC is defective:
Control
If you have found that the analog servo amplifier or the motor is defective:
Drive
components
If you have found that the fault is due to the mechancis of the machine tool:
Mechanics
20 – 354
Replace the MC. --> See "Exchange of HEIDENHAIN Components" on page 28 – 523.
Replace the drive component. --> Ask the respective manufacturer!
Replace mechanical components. --> Ask your machine tool builder.
HEIDENHAIN Service Manual iTNC 530