10.4 Saving and Loading Recordings
You can save recorded oscillograms together with the related settings to files on the hard disk
of the iTNC 530. The files must have the extension *.DTA.
You can call saved oscillograms in the integrated oscilloscope at any time:
10 – 110
Record an oscillogram.
Exit the oscillogram by pressing the END soft key. --> You return to the setup screen for the
integrated oscilloscope.
Now press the SAVE SCREEN soft key. --> There appears a suggestion for the path and name
of an oscilloscope file in the header:
Note
You can change the path and name of the oscilloscope file. The file extension must alway
be DTA.
Press the ENT key. --> The file is created.
Note
This file can then be moved to an external data medium (e.g. using TNCremoNT or a USB
flash drive).
Now press the RESTORE SCREEN soft key in the setup menu. --> There appears a suggestion
for the path and name of an oscilloscope file in the header:
Note
Enter here whether the oscillogram was filed under another name in another path.
Press the ENT key. --> The oscillogram is displayed.
HEIDENHAIN Service Manual iTNC 530